Honeywell X-NRI/EN Network Resource Interface
₱190,117.00
The X-NRI/EN Network Resource Interface is the universal interface for Honeywell’s X-618 PAVA system. It offers central interfaces management, making it ideal for middle-to-large applications. It provides external control access, audio extension and main power protection. It also incorporates 32 dry contact inputs for fire alarm integration.
In Stock
CompareDescription
Honeywell’s X-NRI/EN Network Resource Interface applies the main power supply and a 24 VDC backup power supply. By default, the device is running on the main power. When the main power is disabled, it automatically relays to a backup power supply. As the main power resumes normal, the power supply switches back to the main power.
The X-NRI/EN has main power protection. When an internal short circuit or other forms of malfunction happens, the main power supply will be cut off to protect the device. By self-detection, it can detect faults in the main/backup power supply, system malfunction, and communication faults. Whenever there is a fault, the indicator turns yellow and the siren goes off to warn the operators, while the fault status is logged.
X-NRI/EN has 4 RCA terminals for external audio source input. External audio sources can be connected to XNRI/EN directly such as CDs or DVDs. Through XSMART software, the voice alarm zones of each XDCS2000/EN can be pre-configured and overridden by the BGM broadcast using the recorded emergency voice message. It can also deliver different evacuation messages which were pre-set in each adjacent zone.
Features:
- 4 AUX balanced audio input for digitalization of the external analog audio source and routing to the network
- With built-in 512MB Flash memory and 4G SD card as an internal audio source
- 4 Ethernet interfaces allow communication of multiple X-DCS2000/EN
- 32 x dry contact control inputs with supervision and input faults can be monitored
- 2 x RS-485 communication terminals for integration with Fire Panel via protocol
Additional information
Weight | 7.3 kg |
---|---|
Dimensions | 48.2 × 8.8 × 42.0 cm |
TECHNICAL SPECIFICATIONS
Main power supply | -100 – 240 V, 50/60 Hz |
Backup power supply | DC 215V 28 5 V |
Main power fuse | T2 AL 250 V |
Rated power | 15 W |
Auxiliary input | |
Input channels | 4 |
Input signal | V 0 dBV |
Input impedance | 20 kQ |
Frequency response | 60 Hz 16 kHz |
S/N | > 85 dB |
Balanced Input | |
Input channels | 4 |
Input signal | 14 mV (-37 dBV) /1 V(odBV) |
Input impedance | 20 kQ |
Phantom power supply | DC 24 V |
Frequency response | 60 Hz-16 kHz |
S/N | > 65 dB |
Control Terminal | |
Trigger inputs | 32 inputs (can be monitored) |
You must be logged in to post a review.
Reviews
There are no reviews yet.