Key Features: Next generation heat sensing technology 135 °F (57 °C) fixed temperature alarm point Uses existing wiring Automatic device mapping Sensor Markings provide easy testing identification Up to 250 total devices per loop Non-volatile memory Electronic addressing Bicolor (green/red) status LED Has cover marking for easy identification during testing Standard, relay, fault isolator, and audible mounting bases 50 foot…
Key Features: Monitor and waterflow / tamper applications Includes alarm with delayed latching (retard) for waterflow applications, Supervisory, and Monitor. Non-volatile memory Permanently stores serial number, type of device, and job number. Automatically updates historic information including hours of operation, last maintenance date, number of alarms and troubles, and time and date of last alarm. Automatic device mapping Each module…
Key Features: Multiple applications Including Alarm, Alarm with delayed latching (retard) for waterflow applications, Supervisory, and Monitor. The installer selects one of four “personality codes” to be downloaded to the module through the loop controller Plug-in (UIO) or standard 1-gang mount UIO versions allow quick installation where multiple modules are required. The 1-gang mount version is ideal for remote locations…
Key Features: LCD models feature large 4 x 20 character backlit LCD display LED models provide 16 pairs of LEDs for zone annunciation Available expander extends capability with 24 pairs of LEDs Up to two expanders may be wired to each annunciator Status LEDs and internal buzzer standard on all models Common controls available for LED and LCD display models…
Key Features: One Class A or Class B intelligent device loop standard, optional loops brings control panel capacity to 1000 devices 24-line by 40-character backlit LCD capable of displaying eight simultaneous events Optional voice evacuation and firefighter’s telephone Suitable for low frequency signaling in sleeping areas Optional network interface slots on the back of a swingable mounting chassis Electronic addressing…
Key Features: One Class A or Class B intelligent device loop standard, optional second loop brings control panel capacity to 500 devices 24-line by 40-character backlit LCD capable of displaying eight simultaneous events Optional voice evacuation and firefighter’s telephone 3 Form C relays: alarm, trouble and supervisory Optional network interface slots are located on the back of a swingable mounting…
Key Features: One Class A or Class B intelligent device loop standard, optional loops brings control panel capacity to 1000 devices 24-line by 40-character backlit LCD capable of displaying eight simultaneous events Optional voice evacuation and firefighter’s telephone Suitable for low frequency signaling in sleeping areas Optional network interface slots on the back of a swingable mounting chassis Electronic addressing…
Key Features: One Class A or Class B intelligent device loop standard, optional second loop brings control panel capacity to 500 devices 24-line by 40-character backlit LCD capable of displaying eight simultaneous events Optional voice evacuation and firefighter’s telephone 3 Form C relays: alarm, trouble and supervisory Optional network interface slots are located on the back of a swingable mounting…
Key Features: Remote or Local mounting Two channel input Connects to signature data circuit Allows switching between two channels without additional control modules Eliminates the need for additional amplifier monitoring Output selectable as 25Vrms or 70Vrms Dual input level allows the use of a 1Volt or 25Volt input signal Back up amplifier connection Back up 1kHz tone generator
Key Features: Single and Dual input (riser) select Used for connecting supervised 24 Vdc Audible/Visible signal circuits, or 25 and 70 VRMS Audio Evacuation and Telephone circuits to their power inputs. Ring-tone generator When configured for telephone circuits, the GSA-CC1 generates its own ring-tone signal. Plug-in (UIO) or standard 2-gang mount UIO versions are ideal for multiple modules while the…
Key Features: Manipulates, tests, and monitors Signature SLC and connected devices Ideal for system verification and troubleshooting Compact, easy-to-use for factor Bright touch-screen graphical user interface Easy-access terminal blocks for field wiring Rechargeable lithium-ion battery Includes PC software for report generation and data management 8 now adds selectability to Optica normal LED flashing 8 brings increased diagnostics for locating wiring…
Key Features: Connects the detector to the signaling line circuit (SLC) Provides wiring terminals for connection to a GSA-LED Standard base for Kidde Intelligent Optica Series Detectors. Mounts to North American 1-gang boxes and to 3.5 inches to 4 inches octagon boxes, 1.5 inches deep Also mounts to European BESA and 1-gang boxes with 60.3 mm fixing centers
Key Features: Traditional familiar teardrop design with simple positive pull action and sturdy die-cast metal body. Available for one (GA) or two stage (pre-signal) alarm systems. With Break Glass operation rod that discourages tampering Intelligent device with integral microprocessor which substantially improves control panel response time. Less sensitive to line noise and loop wiring properties. ADA Compliant for manual pull…
Key Features: Ultra-low device current consumption Selectable 15, 30, or 75 cd light output May be mixed with legacy Xenon strobes Selectable high or low dB horn output Improved audio frequency range for better wall penetration Compact design—single gang mounting Ultra-slim with no visible mounting screws Multiple Cover Options either with FIRE markings or no FIRE markings Easy to Install…
Key Features: High Performance LED Strobe Technology Ultra-low device current consumption High efficiency optics Selectable 15, 30, 75, or 110 cd light output May be mixed with legacy Xenon strobes Selectable high or low dB horn output Selectable temporal or steady horn output Improved audio frequency range for better wall penetration Low-profile, ultra slim design with no visible mounting screws…
Key Features: High fidelity performance with excellent STI rating of .81 Low Frequency (520Hz) output meets NFPA standards High-performance LED Strobe Technology Ultra-low device current consumption High efficiency optics Selectable 15, 30, 75, or 110 cd light output LED devices may be mixed with legacy Xenon strobes Speakers are capable of 25V and 70V in a single model with a…
Key Features: Multiple applications: Alarm, Alarm with delayed latching (retard), Supervisory, and Monitor GSA-CT1HT rated for high temperature environments Suitable for attic installation and monitoring high temperature heat detectors Plug-in (UIO) for quick installation or standard 1-gang mount for remote locations that require a single module Automatic device mapping Transmits circuit location information to the loop controller with respect to…
Key Features: High Power Rating of 120/240 VAC or 24 VDC rated contact to control external appliances Provides one relay with 2 Form C contacts Relay accepts 12 to 18 AWG (1.0 to 4.0 mm²) wiring from 2 sources Transmits information to the loop controller regarding their locations with respect to other devices on the loop Easy wiring and module…
Key Features: Provides one no/nc contact (GSA-CR/MCR) Form “C” dry relay contact can be used to control external appliances ex. door closers, fans, dampers etc. Allows group activation and operation of sounder bases by reversing the polarity of its 24 Vdc output Plug-in (UIO) or standard 1-gang mount for quick installation of multiple modules The 1-gang mount is ideal for…
Key Features: Single and Dual input (riser) select Connects supervised 24 Vdc Audible/Visible signal circuits to their power inputs. Connects 25 and 70 VRMS Audio Evacuation and Telephone circuits to their power inputs Plug-in (UIO) or standard 2-gang mount for quick installation of multiple modules The 2-gang mount is ideal for remote locations with a single module Transmits information to…
Key Features: Pull lever Simple positive operation Break glass Attractive, streamline design Less than 5 lb. pull force complies with ADA Solid, die-cast metal construction
Key Features: Auto-programming speeds installation time Supports V-Series intelligent modules and detectors Form C contacts for alarm and trouble, Form A for supervisory Electronic addressing with automatic device mapping Optional Ethernet port (SA-ETH) for central station monitoring service, programming, diagnostics and a variety of system reports Two programmable switches with LEDs and custom labeling Supports Genesis horn silence over two…
The VS1 provides one Class A or Class B intelligent device loop that supports up to 64 device addresses, and two Class B Notification Appliance Circuits (NACs). Optional Class A device wiring is available with the use of a module.
The V-SLC2-1 is a single loop controller card that can be used with the VS1 as a replacement for the standard 64-point loop, or with the VS4 as a 250-point expansion module.
