Description

Overview

The Kidde EG1AVRF Compact Wall Horn features a sleek low-profile design and energy-efficient technology that makes it less expensive to install and operate. Requiring fewer circuits and power supplies, the new EG1AVRF is designed with energy-efficiency and life safety in mind.

The EG1AVRF Wall Horn uses high efficiency optics, combined with patented electronics, to deliver a highly controlled and efficiently focused light distribution pattern in exchange for lower current requirements. Strobes feature field-selectable 15, 30, or 75 cd light output.

Compared with Xenon-type strobes, Kidde’s EG1AVRF needs fewer power supplies and often smaller wire gauge. It is also backwards compatible with legacy strobes, so there’s no need to replace all your existing devices to upgrade to new LED technology. In fact, EG1AVRF strobes can be mixed on the same circuit and used in the same field of view as Xenon-based strobes. This makes the EG1AVRF Wall Horn ideal for new installations and retrofits alike.

Application

Strobes

The Kidde EG1AVRF Compact Wall Horn are UL 1971-listed for use indoors as wall-mounted public-mode notification appliances for the hearing impaired. Synchronization is important to avoid epileptic sensitivity. All Kidde strobes exceed UL synchronization requirements (within 10 milliseconds over a two-hour period) when used with a synchronization source.

Horns

The EG1AVRF Compact Wall Horn output reaches as high as 92 dBA and features an improved audio frequency range. As a result, the sound can penetrate through walls and provide clear warning. They can also be set for high or low dBA output. Models may be configured for either coded or non-coded notification appliance circuits.

Installation

The Kidde EG1AVRF comes with mounting screws for easy installation. The tab at the bottom of the device unlocks the cover to reveal the mounting holes. Its shallow depth leaves ample room for extra wiring. Once installed with the cover in place, the mounting screws will not be visible.

It can mount to any standard one-gang surface or flush electrical box. Matching optional EG1T trim rings are available to cover oversized openings and can accommodate one-gang or 4-inch square boxes. Optional color matched single-gang surface boxes are also available.

Field Configuration

The EG1AVRF is factory set to sound in a 3-pulse temporal pattern. By sliding the tone selector switch, the unit may be configured for constant horn output that can be coded at precise intervals by KIDDE control panels and control modules.

Moreover, it is also factory set for high dB output. Low dB output may be selected by sliding the tone selector switch. It may be set for 15, 30, or 75 candela output. The output setting is changed by simply removing the cover and sliding the candela switch to the desired setting. The device does not have to be removed from the wall to change the output setting. The setting remains visible through a small window on the left-hand side of the device after closing the cover.